Contents x
    Working with Existing Security Solutions
    • 31 Jan 2024
    • 3 Minutes to read
    • Print
    • Dark
      Light
    • PDF
    Contents

    Working with Existing Security Solutions

    • Updated on 31 Jan 2024
    • 3 Minutes to read
    • Print
    • Dark
      Light
    • PDF
    Article summary

    About this Article
    This article provides configuration steps to be followed in security solutions on Probes to ensure VSP works seamlessly along with them


    Ensure that either of the two approaches below is implemented (in the order of preference) to ensure that VSP works seamlessly along with an existing security solution:

    1. Disable any existing security solution (like AV, EDR, HIPS) before VSP Probe is installed
    2. If the existing security solutions cannot be disabled, ensure that the VSP probe files and folders are excluded from any form of monitoring by them on the server. The locations that need to be excluded are listed below:
      1. Windows:
        Text
        C:\Program Files (x86)\Virsec

      2. Linux:
        Text
        /opt/virsec
/var/virsec
        1. In some cases where the existing security product might block new kernel modules, allow the below directory as a trusted kernel module
          Text
          /opt/virsec/rmp/*/bin/*/*/vsysi.ko
      3. Enable Memory Exploit protection on some test systems initially to ascertain that the required exclusions are working as expected
    3. The existing security solution must be allowlisted in CMS. By default, it is added to the allowlist if the security solution is present at the time of the scan 

    Failing to do the above can lead to adverse impacts including system crashes. 

    The configuration procedures for some of the security solutions are provided in the sections below. For other security solutions, contact Virsec Technical Team for confirmation.


    Sophos

    1. On the Sophos console, navigate to Policies > Base Policy - Lockdown Settings 
    2. Ensure that the files and folders mentioned in the table below are added as to the Allowed list:
      1. Files:
        Text
        C:\Program Files (x86)\Virsec\bin\vsp-cli.exe
C:\Program Files (x86)\Virsec\lib\vsp-inject.dll
C:\Program Files (x86)\Virsec\lib\vsp-mem-protect.dll
C:\Program Files (x86)\Virsec\lib\vsp-sbuf.dll
C:\Program Files (x86)\Virsec\vsp_memory\compatibility_tool\client\hybrid.dll
C:\Users\Administrator\Downloads\vsp-host-vm\vsp-host-vm\vm-install.bat
C:\Users\Administrator\Downloads\vsp_install_vm.bat
      2. Folders:
        Text
        C:\Program Files (x86)\Virsec\bin\
C:\Program Files (x86)\Virsec\log
C:\Users\Administrator\Downloads\vsp-host-vm\vsp-host-vm      #Installation path of the system
    3. Ensure that the folders mentioned below are added as to the Exclusion list:
      1. Windows:
        Text
        (?i)C:\\+Program Files \(x86\)\\+Sophos.*
(?i)C:\\Program Files\\Sophos.*
(?i)C:\\Windows\\System32\\SophosAV.*
      2. Linux:
        Text
        /opt/sophos-spl/plugins/.*



    Trend Micro

    1. Trend Micro, Inc. is added automatically to the Publisher List during the initial scan. This ensures that VSP-Manager.exe is NOT stopped in a Windows system
    2. On the Trend Micro console, after a successful login, click Workload Security on the dashboard
      1. Navigate to Computers in the left navigation pane. Double-click the required serverTrend Micro Console
      2. Navigate to Anti-Malware > General > Real-Time. Click Edit to modify Malware Scan Configuration
      3. Ensure that Behavior Monitoring is NOT enabled
      4. Ensure that Activity Monitoring is NOT enabled


    Cortex

    1. For Cortex on Linux setup, ensure that the exclusion list for the profile on CMS has the entry:
      Text
      /opt/traps/*


      Cortex

    2. For Cortex on Windows setup:
      1. Ensure that the folders mentioned below are added as to the Exclusion list:
        Text
        C:\Program Files (x86)\Virsec\*
C:\Program Files (x86)\vspcpm\*
C:\ProgramData\Virsec\*
C:\ProgramData\virsec-web-mem\*
      2. Ensure that the below files are added to the exclusion list
        C:\Program Files (x86)\Virsec\bin\deobfusc.exe
C:\Program Files (x86)\Virsec\bin\filesysmonitor.exe
C:\Program Files (x86)\Virsec\bin\hmm.exe
C:\Program Files (x86)\Virsec\bin\libcrypto-3-x64.dll
C:\Program Files (x86)\Virsec\bin\libssl-3-x64.dll
C:\Program Files (x86)\Virsec\bin\libvspkafkaapi_dll.dll
C:\Program Files (x86)\Virsec\bin\lz4.dll
C:\Program Files (x86)\Virsec\bin\obfusc.exe
C:\Program Files (x86)\Virsec\bin\rdkafka.dll
C:\Program Files (x86)\Virsec\bin\uninstall_password_ui.exe
C:\Program Files (x86)\Virsec\bin\vIPC-server.exe
C:\Program Files (x86)\Virsec\bin\vsp-cli.exe
C:\Program Files (x86)\Virsec\bin\vsp-configure.exe
C:\Program Files (x86)\Virsec\bin\vsp-manager.exe
C:\Program Files (x86)\Virsec\bin\vsp-rmp.exe
C:\Program Files (x86)\Virsec\bin\vsp-watchdog.exe
C:\Program Files (x86)\Virsec\bin\VSPServiceHandler.exe
C:\Program Files (x86)\Virsec\bin\vsp_installer.exe
C:\Program Files (x86)\Virsec\bin\vsp_installer_ca.dll
C:\Program Files (x86)\Virsec\bin\vsp_install_redist.exe
C:\Program Files (x86)\Virsec\bin\fde.exe
C:\Program Files (x86)\Virsec\lib\hmm-sbuf.dll
C:\Program Files (x86)\Virsec\lib\vhmm-utils.dll
C:\Program Files (x86)\Virsec\lib\vhmm_msi_util.dll
C:\Program Files (x86)\Virsec\lib\vIPC-client.dll
C:\Program Files (x86)\Virsec\lib\vsp-hmm-console.dll
C:\Program Files (x86)\Virsec\lib\vsp-hmm-inject.dll
C:\Program Files (x86)\Virsec\lib\vsp-inject.dll
C:\Program Files (x86)\Virsec\lib\vsp-mem-protect.dll
C:\Program Files (x86)\Virsec\lib\vsp-rmp-engine.dll
C:\Program Files (x86)\Virsec\lib\vsp-sbuf-static.lib
C:\Program Files (x86)\Virsec\lib\vsp-sbuf.dll
C:\ProgramData\Virsec\tmp\hmm\hmm.exe
C:\ProgramData\Virsec\tmp\vsp-cli\vsp-cli.exe
C:\ProgramData\Virsec\tmp\vsp-configure\vsp-configure.exe
C:\ProgramData\Virsec\tmp\vsp-manager\vsp-manager.exe
C:\ProgramData\Virsec\tmp\vsp-watchdog\vsp-watchdog.exe
C:\Program Files (x86)\Virsec\ipm\driver\ipm.sys
C:\Program Files (x86)\Virsec\ipm\driver\WdfCoInstaller01.dll
C:\Program Files (x86)\Virsec\hmm\scripts\ProcessHandler.bat
C:\Program Files (x86)\Virsec\hmm\scripts\PsSuspend.exe
C:\Program Files (x86)\Virsec\hmm\driver\VirsecKernelMonitor.sys
C:\Program Files (x86)\Virsec\hmm\driver\WdfCoInstaller01009.dll


    Symantec

    1. If only the base prevention policy is enabled, no action is required
    2. If any prevention policy is enabled, ensure that the policy is modified to add the below directories to the exclusion list:
      1. Windows:
        Text
        C:\Program Files (x86)\Virsec
C:\ProgramData\Virsec
      2. Linux:
        /opt/virsec/
/var/virsec/
    3. Log in to CMS. Navigate to Windows policies and select the required policy assigned to the host machine and click Edit
    4. Click Application Rules > Add
    5. Select Directory and click Next
    6. Provide a suitable name and the required directory. Click AddSymantec Add Application
    7. Once the directory is added, click Apply
    8. Log into Symantec Web Portal
    9. Navigate to Assets. Select the asset and re-apply the updated policy
    10. The changes are applied on the host in 10-20 minutes


    SentinelOne

    1. On the Sentinel Console, navigate to Sentinels in the left navigation pane
    2. Click Create Exclusion and create exclusions for the below directories:
      1. Windows: 
        C:\Program Files (x86)\Virsec
C:\ProgramData\Virsec
      2. Linux:
        Text
        /opt/virsec/
/var/virsec/


    Was this article helpful?
    What's Next